Toady Bloyster

Toady Bloyster
Appears in	Pikmin 2, Pikmin 3
Scientific name	Molluschid minionicus
Family	Mollusking
Areas	Perplexing Pool, Garden of Hope, Twilight River
Caves	None
Challenge Mode stages	The Giant's Bath
Mission Mode Collect Treasure! stages	Forgotten Cove, Clockwork Chasm
Mission Mode Battle Enemies! stages	Silver Lake, Shaded Garden, The Rustyard
Side Story days	None
2-Player Battle stages	None
Bingo Battle stages	Buried Pond
Attacks	Eats Pikmin in Pikmin 2 Eats Pikmin and releases ink in Pikmin 3

Toady Bloysters (ツブラメケメクジ^?) are slug-like creatures found in Pikmin 2 and Pikmin 3. They creep along the ground in search of food, and upon discovering Pikmin, they emit a loud call reminiscent to that of a cow calf, then lash out their pseudopodia-like tentacles. Any Pikmin hit by the tentacles stick, and are ingested if the Bloyster is not killed before it can finish "chewing." As slow as they may be, a Bloyster is capable of causing a very large and sudden drop in the number of Pikmin a leader has at their disposal, should the player be careless enough to allow the Bloyster the chance.

Its weak spot is a gill-like organ on its back. Although its body can be attacked for lesser damage in Pikmin 3, in the previous game, only the bulb can be attacked (even though it's possible to attack the body using Purple Pikmin). When it receives heavy damage, it shakes its tail and throws away any Pikmin hanging on to it in Pikmin 2, but merely ejects ink in Pikmin 3. This ink can temporarily and non-fatally choke any nearby Pikmin, but those hanging on the bulb will not be affected. In Pikmin 2, it has seven distinct tentacles, whereas in the sequel, it has one that splits into six.

In the second game, a single Toady Bloyster spawns in the Perplexing Pool, and tends to rove around the shallows near the entrance to the Shower Room. When defeated, it typically drops two 10-Pellets in addition to the gill-like organ on its back, which is worth 25 Pikmin at any Onion. Entering any of the caves in the Perplexing Pool will trigger a respawn, making this Bloyster a particularly low-risk method of spawning large amounts of Pikmin in a short amount of time, potentially 45 Pikmin per Bloyster defeated. In Challenge Mode, a Toady Bloyster holds The Key on the first sublevel in The Giant's Bath. In Pikmin 3's Story Mode, one appears in the Garden of Hope, and one in the Twilight River.

Stats

Game	Weight	Max. carriers	Seeds	Value	Health	Regen.
	3	6	25	× 10	800	2.4 HP/s
(?)	3	6 (normally)	20	× 50  × 50	1500	No

Notes

Olimar's notes

“This species of creature has yet to fully evolve from shelled mollusk to the more advanced bloyster. Compared to the bloyster, this creature is significantly smaller. The fact that its mandibles do not protrude as significantly as the ranging bloyster is due in part to the fact that like most mollusks, its vital organs are located deep within the creature's carapace.”

Louie's notes

“Pan-sear the herbs and oil until lightly crusted on the outside and rosy on the inside. Complement the savory flavors with a light and buttery creme sauce.”

Strategy

The following article or section contains guides. The strategies shown are just suggestions.

Pikmin 2

The following article or section is in need of assistance from someone who plays Pikmin 2. Particularly: I think this enemy does not actively chase Pikmin. Confirm and add.

The best method of taking down a Toady Bloyster is simple; approach it from the back, and latch as many Pikmin as possible onto the gill-like organ protruding from its back. If you are feeling bold, you may instead decide to simply barrage the Bloyster in question with Purple Pikmin. Petrifying the Bloyster and following the petrification with a headlong assault works just as effectively as either of the two aforementioned methods, but due to requiring an ultra-bitter spray and not leaving a corpse, is recommended only if your Pikmin count is especially low, or if you wish to minimize any chances for casualties.

Pikmin 3

The Toady Bloyster can be attacked by throwing Pikmin onto its bare, fleshy back instead of the gill-like protrusion on its back. If the Bloyster releases ink, just whistle the affected Pikmin back to you and continue the assault, and if you don't, they will not die and just become idle. Using an ultra-spicy spray proves to be effective as well. Throwing Pikmin at the gill organ, as stated before, will prevent them from being sprayed with ink, allowing just a few Pikmin to kill it in seconds. This is a helpful strategy, especially for Mission Mode.

It can be noted that the Toady Bloyster found in at least Silver Lake and Shaded Garden on Battle enemies! mode are significantly weaker than the average one.

Technical information

See: Ranging Bloyster technical information, for Pikmin 2

Internally, in Pikmin 2, the Toady Bloyster is just a Ranging Bloyster, but some of the properties provide specific differences, and the hard-coded ability to be entranced by leaders is removed.

Pikmin 3 technical information (?)
Internal name	kemekuji
HP	1500
Rock Pikmin throw hits to kill	30
White Pikmin ingestions to kill	5
Bomb rock explosions to kill	1
Bomb rock ingestions to kill	1
Number of direct hits on top to kill	0
Damage to leaders	10
Territory radius	300
Mission Mode value	50

Other information

• Size: Body length: 105mm, as per the e-card
• Pikmin 2 Piklopedia number: #42

Naming

The following article or section needs help from someone who can translate Japanese text.

"Toady" is a noun for someone who acts excessively obedient for someone else, like a minion. It could also reference the Toady Bloyster's toad-like profile, although "toady" is not normally an adjective. "Bloyster" is a gibberish alteration of "oyster," a well-known mollusk; it could possibly be a portmanteau of "bloat" and "oyster," given the bloated look of the creature. The Toady Bloyster's Japanese name is ツブラメケメクジ^?. Its scientific name is molluschid minionicus, in which molluschid is the main genus name used on the mollusking family, and minionicus is similar to the English word "minion". In Pikmin 2, it uses the internal name umimushiblind, which is the Ranging Bloyster's internal name, but with "blind" at the end of it, since it does not see the leaders' beacons. For Pikmin 3, the internal name was changed to kemekuji, which is part of its Japanese name.

Names in other languages

Language	Name	Meaning
French	Jeune Eventraille	Portmanteau of "éventrer" (disembowel) or "entrailles" (innards) and "éventail" (fan), and "jeune" (young)
Spanish (NoA)	Berberéchido soplón	Snitch bivalve
Spanish (NoE)	Berberéchido soplón	Snitch bivalve

Gallery

• 

  A Toady Bloyster's tongue attack in Pikmin 2.

• 

  Toady Bloysters seen in the Piklopedia.

• BetterResToady.PNG

  A Toady Bloyster in Pikmin 3.

• ZlCfzREdo3Ay6hDjKx.jpg

  The fully stretched-out tongue of the Toady Bloyster in Pikmin 3.

• ZlCfzREdl2EMMU6nqn.jpg

  Another picture of the Toady Bloyster wandering about in Pikmin 3.

• 

  Official render of the Toady Bloyster from Pikmin 2.

• Cnp3.JPG

  The creature's e-card, #26.

• 

  The data file on the Toady Bloyster.

Trivia

• Toady Bloysters are based on nudibranches, which are sea slugs that are very similar in appearance.
• In Pikmin 3, leaders can climb on top of Toady Bloysters by walking onto them from their backs.

See also

• Ranging Bloyster