Update
|
This article or section is in need of more images. |
- For the improvements leaders get throughout the games, see upgrade.
A software update refers to changes made to an existing piece of software, after its release. This may include either updates downloaded via the internet, or updates printed onto game discs after a certain point. In the Pikmin series, only Pikmin 3, Pikmin 3 Deluxe, and Pikmin Bloom have received downloadable updates after their release. Outside of the Pikmin franchise, titles with Pikmin content such as Super Smash Bros. Ultimate have also had updates.
Software updates are typically meant to fix glitches, though some may also change gameplay or control elements, or add additional content.
In Pikmin and Pikmin 2
|
To do: The exact changes between versions should be detailed. TCRF is a good resource. |
Due to the inability to modify the game after it has been printed to a physical disc, updates to these games are only available as new discs made after the initial release. A number, both physically etched on the inside and present within the game data, denotes which version of the game the disc contains. 0 represents the initial release, while 1, 2, or more represents the number of times the game has had a version update. These numbers are also commonly known as 1.00, 1.01, or 1.02 respectively.
An example of an update in Pikmin can be found in the Japanese release, where revision 2 removes the sunset cutscene softlock.
Known game disc versions by region
| Title | Japan | US | Europe | Korea |
|---|---|---|---|---|
| Pikmin | 1.01, 1.02 | 1.00, 1.01 | 1.00 | - |
| Pikmin 2 | 1.00 | 1.00 | 1.00 | - |
| New Play Control! Pikmin | 1.00 | 1.00 | 1.00 | 1.00 |
| New Play Control! Pikmin 2 | 1.01 | 1.00 | 1.00 | - |
In Pikmin 3
|
To do: Finding the size of each update would be grand. |
Pikmin 3's updates are downloaded off the internet, and each one upgrades the game to a new version. With the release of most of these updates, downloadable content was added to the eShop, and the first stage in a bundle is added to the game for free upon updating. When the player updates their game, all available updates are installed at once, and the game is set to the latest version right away.
Although it is possible to uninstall the updates from the console and return to the original 1.0.0 version, it is not possible to install a version between the first one and the latest one.
List of Pikmin 3 updates
Version 1.1.0
Released on July 25th, 2013, and is around 70MB in size.[1]
This update adds SpotPass and Miiverse compatibility, as well as the ability to view world record scores for game completion.
Version 1.2.0
Released on October 1st, 2013.
In this update, a new feature is added, allowing players to view the world record scores for each stage, Solo or Co-Op. With the update, five new Collect treasure! stages are added to the game as downloadable content. These stages are remixes of previous Mission Mode stages. The stage Tropical Forest Remix is given free of charge upon updating, while the others must be purchased in a bundle from the Nintendo eShop, for $1.99 / €1.99 / £1.79:
Version 1.3.0
Released on November 6th, 2013.
This update adds no new features, but gives for free the first out of five new Battle enemies! stages, added to the game as downloadable content. These stages are based off of certain parts of areas from Story Mode. The stage Tropical Wilds Remix is given free of charge upon updating, while the others can be purchased as a bundle on the eShop for $1.99 / €1.99 / £1.79:
Version 1.4.0
Released on December 2nd, 2013.
This update provides for free one of the new five Collect treasure! stages and one of the new five Battle enemies! stages. The stage Fortress of Festivity is given free of charge in both modes, upon updating. These stages are brand new, and are themed on human-based environments, such as an abandoned construction site or a living room decorated for Christmas. Other stages function differently, with one stage being partially two-dimensional. One stage, however, is a re-skin of The Forest Navel, probably due to the fact that it is the only area not "remade" in Pikmin 2 – its name, Forgotten Cove, further accentuates this.
Olimar and Louie are playable in certain stages. Olimar is available from the start, but Louie is usually trapped or being held by an enemy. By defeating the enemy and carrying Louie back to the SPERO, the player gains access to him.
The following stages have been added, besides Fortress of Festivity. The entire pack costs $4.99 / €4.99 / £4.79 on the eShop:
This update also changes the way leaders act when they fall into the abyss – they now receive damage (one third of their maximum health), and respawn differently, rendering some glitches impossible. These adjusted respawn points include the first bridge in the Garden of Hope, the electrical gate near the Dusk Pustules in the Garden of Hope, and leaders that fall off behind the paper bag near the Winged Onion in the Twilight River.
Version 2.0.0
|
The following article or section is in need of assistance from someone who plays Pikmin 3. |
Released on May 29th, 2014.
This update offers a new control mode involving the GamePad, using only the touchscreen and the left-side buttons and sticks. This mode works similar to Pikmin Adventure. When playing with the new Stylus mode, 3 buttons are added to the touchpad, used for deploying ultra-spicy spray, dismissing the squad or ordering them to charge, and accessing the KopPad's apps. To switch between leaders, the player must tap their icon. The whistle button is moved from 
to 
. Other controls remain the same.
When the player starts the game for the first time after this update is installed, a message appears saying "GamePad control style has been set to [Stylus]. Players can switch back to the original controls via the menu." Other minor new additions include a new button on the pause menu, to switch between Classic GamePad mode to Stylus mode, even if the player is not playing with the GamePad.
When locked-on, two new lines of text appear, saying "
/ 
= Cancel Lock On" and "
/ 
= Charge". When an explorer is under the Go Here function, if the player switches to them, a message will appear saying "
/ = Cancel Go Here". The background on the "
/ 
Skip Cutscene" label was now changed to black instead of transparent.
Finally, the ability to skip portions of the End of Day report were added, a button to retry a mission at the Mission Mode results screen was added, and several major glitches were fixed. This version[source needed] also made it possible to perform the pluck cancel trick.
In Pikmin 3 Deluxe
Pikmin 3 Deluxe, being on the Nintendo Switch, can receive updates from the Nintendo eShop. There has been 1 update to the game so far.
List of Pikmin 3 Deluxe updates
Version 1.1.0
Released on November 24th, 2020.
This update fixes 2 bugs. The first bug concerns collected fruits not being recorded under certain conditions. The second bug concerns badges reverting to the unacquired status under certain conditions.[2]
In addition, there are reports of the gyro capabilities behaving differently after this update, including the cursor becoming stuck in the corner after most cutscenes, or the sensitivity being increased.[3][4]
In Pikmin Bloom
Pikmin Bloom, being a mobile game, can receive updates much more often than a game on a console, through the App Store (on iOS) or the Google Play Store (on Android). As the game requires an internet connection to play, having the game on a recent version is necessary to play the game. The update descriptions below have some text copied from the official update logs, and some text describing changes not mentioned in the update logs.
List of Pikmin Bloom versions
- iOS version history
| Version | Changes | Date |
|---|---|---|
| 33.1 | First public version | October 27th, 2021 |
| 33.3 |
|
October 27th, 2021 |
| 33.4 |
|
November 5th, 2021 |
| 34.0 |
|
November 19th, 2021 |
| 36.0 |
|
December 13th, 2021 |
- Android version history
| Version | Changes | Date |
|---|---|---|
| 33.2 | First public version | October 27th, 2021 |
| 33.3 | October 27th, 2021 | |
| 33.4 |
|
November 1st, 2021 |
| 34.0 |
|
November 9th, 2021 |
| 34.2 |
|
November 15th, 2021 |
| 34.3 |
|
December 2nd, 2021 |
| 34.4 |
|
December 3rd, 2021 |
| 36.0 |
|
December 13th, 2021 |
See also
References
- ^ Pikmin 3 1.1.0 adds SpotPass data and Miiverse functionality on Expansive
- ^ How to update Pikmin 3 Deluxe on Nintendo Support, retrieved on November 26th, 2020
- ^ My cursor is very sensitive and I don't know why. It feels fine with detached 'cons, but it's sensitive in handheld mode. Help? on Reddit, published on December 6th, 2020, retrieved on December 7th, 2020
- ^ Has anyone else been having trouble with gyro ever since they downloaded the update? on Reddit, published on November 27th, 2020, retrieved on December 7th, 2020